Paper
6 April 2009 Shape-variable sandwich structure with SMA honeycomb core and CFRP skins
Yoji Okabe, Hiroshi Sugiyama
Author Affiliations +
Abstract
The authors proposed a sandwich structure that consists of a shape memory alloy (SMA) honeycomb core and carbon fiber reinforced plastic (CFRP) skins as a lightweight geometric-variable structure. This method has the better ability to bend skins with high in-plane stiffness, because the SMA honeycomb core generates a recovery-shear-force and applies the force uniformly to the skins. Hence, although this sandwich beam is really lightweight and has a moderate specific bending stiffness, the beam can be bent by raising the temperature. The honeycomb core was made of thin Ti-Ni SMA foils, and skins were thin unidirectional CFRP laminates. Pre-shear-strain was applied to the SMA honeycomb core, and the both ends of the two skins were fixed. When the beam was heated, it was bent upward taking the form of a sigmoid curve. Furthermore, it was verified that the beam was able to generate the sufficient actuation force. Then, when the specimen was cooled down to the room temperature, the specimen returned to the straight beam again. Hence the twoway actuation is possible by heating and cooling. Also the mechanism of this bending deformation could be clarified by a numerical simulation using the finite element method.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yoji Okabe and Hiroshi Sugiyama "Shape-variable sandwich structure with SMA honeycomb core and CFRP skins", Proc. SPIE 7288, Active and Passive Smart Structures and Integrated Systems 2009, 728817 (6 April 2009); https://doi.org/10.1117/12.814014
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Shape memory alloys

Skin

Beam shaping

Finite element methods

Astatine

Manufacturing

Numerical simulations

Back to Top