Design considerations for the acoustic emission testing of large composite specimens

Jonathan J. Scholey; Paul D. Wilcox; Michael R. Wisnom; Mike I. Friswell

doi:10.1117/12.815318

26 March 2009 Design considerations for the acoustic emission testing of large composite specimens

Jonathan J. Scholey, Paul D. Wilcox, Michael R. Wisnom, Mike I. Friswell

Proceedings Volume 7294, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2009; 729405 (2009) https://doi.org/10.1117/12.815318
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2009, San Diego, California, United States

Abstract

Acoustic emission (AE) testing is a sensitive technique capable of detecting many types of defect with a sparse sensor array making it an attractive structural health monitoring technology. The widespread application of the technology is limited by a lack of predictive modelling and in part, the lack of quantitative source characteristics. The vast majority of current laboratory AE testing is conducted on small coupons which cannot be used to generate quantitative source characteristics since reflected wave energy from the specimen edges influences the received waveforms. An alternative approach is to test on large specimens where the modal properties of propagating waves can be examined with no influence from reflected wave energy. However, the design and testing of large specimens is not trivial. The work in this paper discusses the design of large fibre reinforced composite (FRC) specimens which are suitable for making quantitative source measurements. The design considerations include the minimum plate dimensions and placement of sensors. A novel technique, referred to as the location-time plot technique, is described which links propagation characteristics, specimen dimensions and sensor locations to map the dispersion of elastic waves in plates. The technique is demonstrated in the design of a simple AE experiment on a highly anisotropic plate. The technique is then used in the design of a practical AE testing arrangement for monitoring delamination from artificial defects in a large FRC plate. Experimental waveforms, recorded using this AE testing arrangement, are presented and are shown to be in agreement with the location-time plot technique.

Citation Download Citation

Jonathan J. Scholey, Paul D. Wilcox, Michael R. Wisnom, and Mike I. Friswell "Design considerations for the acoustic emission testing of large composite specimens", Proc. SPIE 7294, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2009, 729405 (26 March 2009); https://doi.org/10.1117/12.815318

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available