Paper
28 August 2009 Dynamic analysis and optimal design of exposure device of laser detector based on a virtual prototype
Da Xu, Jian-xun Zhao, Jun-biao Hu, Hua Li, Chuan-you Wang, Bing-wei Li
Author Affiliations +
Proceedings Volume 7382, International Symposium on Photoelectronic Detection and Imaging 2009: Laser Sensing and Imaging; 738238 (2009) https://doi.org/10.1117/12.831398
Event: International Symposium on Photoelectronic Detection and Imaging 2009, 2009, Beijing, China
Abstract
The dynamical simulation model of the exposure device of laser detector is built up in ADAMS software. Aiming at optimizing the movement law of the pole and minimizing the maximal value of load of key parts, the influences of the spring stiffness coefficient,the damping coefficient, preload of spring and the mass of pole on the optimal goal are discussed. The virtual prototype of the exposure device of laser detector has been optimized and the optimized parameters are obtained. In order to choose the electromotor and material, intensity of key parts is checked based on ANSYS. And the problem of TQC is solved effectively by this way.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Da Xu, Jian-xun Zhao, Jun-biao Hu, Hua Li, Chuan-you Wang, and Bing-wei Li "Dynamic analysis and optimal design of exposure device of laser detector based on a virtual prototype", Proc. SPIE 7382, International Symposium on Photoelectronic Detection and Imaging 2009: Laser Sensing and Imaging, 738238 (28 August 2009); https://doi.org/10.1117/12.831398
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Prototyping

Instrument modeling

Sensors

Content addressable memory

Motion models

Process modeling

3D modeling

Back to Top