Paper
20 October 2009 Heat treatment of piezoelectric Pb(ZrTi)O3 ceramic fibers prepared with continuous spinning
Z. X. Xiong, J. Pan, H. Xue, M. F. Mai, H. Qiu, L. F. Chen
Author Affiliations +
Proceedings Volume 7493, Second International Conference on Smart Materials and Nanotechnology in Engineering; 74934N (2009) https://doi.org/10.1117/12.843577
Event: Second International Conference on Smart Materials and Nanotechnology in Engineering, 2009, Weihai, China
Abstract
Ceramic of Pb(ZrTi)O3 is one kind of typical smart materials, with excellent ferroelectric and piezoelectric properties. In this paper, a novel heat treatment was applied for the ceramic fibers prepared via sol-gel route with continuous spinning. Aided with microwave energy, dense ceramic fibers are obtained after treated at around 900°C for 1h, in which the diameters of the fibers are between 5μm and 30μm. The samples were also characterized with thermal analysis, FTIR spectroscopy and X-ray diffraction. By using of a scanning electron microscope, SEM, it was observed that a dense microstructure of the fiber was reached.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Z. X. Xiong, J. Pan, H. Xue, M. F. Mai, H. Qiu, and L. F. Chen "Heat treatment of piezoelectric Pb(ZrTi)O3 ceramic fibers prepared with continuous spinning", Proc. SPIE 7493, Second International Conference on Smart Materials and Nanotechnology in Engineering, 74934N (20 October 2009); https://doi.org/10.1117/12.843577
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ceramics

Ferroelectric materials

Heat treatments

Scanning electron microscopy

Microwave radiation

Sol-gels

FT-IR spectroscopy

Back to Top