Paper
31 December 2009 Aspects of laser optics qualification for space applications
Author Affiliations +
Abstract
As a consequence of the ongoing interest for deployment of laser systems into space, suitable optical components have to be developed and must be extensively space qualified to ensure reliable, continuous, and autonomous operation. The exposure to space environment can adversely affect the longevity of optics, mainly coatings, and lead to system degradation. An increased operational risk is due to the air-vacuum effect, which can strongly reduce the laser damage resistance of optical coatings. For this purpose, a vacuum laser damage test bench has been developed and is operated at DLR. In extensive test campaigns, all damage-prone optics of the ALADIN laser system (being the laser source of the upcoming ESA ADM Aeolus mission) were tested under operative conditions at the fundamental and at the harmonic wavelengths of Nd:YAG. Further operational risks are due directly to operation under high vacuum. In the past, several space-based laser missions have suffered from anomalous performance loss or even failure after short operation times. This degradation is due to selective contamination of laser-exposed optical surfaces fed by outgassing constituents. These volatile components are omnipresent in vacuum vessels. Various organic and inorganic species were tested at our facilities for their criticality on deposit built-up. Finally, active optical components like Q-switch crystals or frequency converter crystals can also suffer from bulk absorption induced by high-energy radiation (gray tracking) and dehydration. To analyze these effects, an ultrahigh vacuum phase matching unit was set up to test various combinations of SHG and THG frequency converters.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wolfgang Riede, Paul Allenspacher, Helmut Schröder, Peter Mahnke, Gabriela Paunescu, and Denny Wernham "Aspects of laser optics qualification for space applications", Proc. SPIE 7504, Laser-Induced Damage in Optical Materials: 2009, 75040T (31 December 2009); https://doi.org/10.1117/12.837384
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Laser optics

Optical coatings

Space operations

Ferroelectric materials

Laser induced damage

Optical components

Back to Top