Paper
21 October 2009 Experimental study of discharge for 200W RF excited slab lasers
Yu Xiao, Xiahui Tang, Juan Liu, Yingxiong Qin, Fei Yan, Wang Du
Author Affiliations +
Abstract
An 81 MHz TEM electromagnetic wave transmitting between the electrodes would cause the nonuniform discharge along the electrodes. The variation of the voltage distribution with pressure and feed-in power bring difficulties to design match network. In order to achieve impedance matching, the 2000W RF slab discharge platform the different type of matching network are used. Through analyzing the matching network, the equivalent electrical parameter is estimated. In the experiment, though using resonance inductances the voltage distribution along the electrodes is improved. The results show that under the typical condition of the RF slab laser operation, the π matching network can work well and the reflective power is less than 5%. When a mid-feed point is used, the feed-in power is 2000W, two 28nH inductances are attached at both end of the electrodes, two 24nH inductances are fixed on both points of one-fourth of the electrodes, the uniform discharge is got on the 500mmx40mm electrodes, and the feed-in power density is 65W/cm3.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu Xiao, Xiahui Tang, Juan Liu, Yingxiong Qin, Fei Yan, and Wang Du "Experimental study of discharge for 200W RF excited slab lasers", Proc. SPIE 7515, Photonics and Optoelectronics Meetings (POEM) 2009: Industry Lasers and Applications, 75150C (21 October 2009); https://doi.org/10.1117/12.843478
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Plasma

Carbon dioxide lasers

Inductance

Capacitance

Laser applications

Reflectivity

Back to Top