Paper
25 February 2010 AlN antiresonant layer ARROW waveguides
Author Affiliations +
Proceedings Volume 7598, Optical Components and Materials VII; 75981X (2010) https://doi.org/10.1117/12.842498
Event: SPIE OPTO, 2010, San Francisco, California, United States
Abstract
Aluminum Nitride (AlN) is a wide band gap III-V semiconductor material often used for optical applications due to its transparency and high refractive index. We have produced and characterized AlN thin films by reactive r.f. magnetron sputtering in different Ar-N2 atmospheres in order to verify the best gaseous concentration to be utilized as anti-resonant layer in ARROW waveguides. The corresponding films were characterized by Fourier transform infrared spectroscopy (FTIR), Rutherford backscattering spectroscopy (RBS), Ellipsometry and visible optical absorption. The AlN properties did not varied significantly between the films deposited with 20 and 70 sccm of N2, most of the variations occurred for films deposited with 18 sccm of N2 or below. The film deposited with 20 sccm was selected to be used as the first ARROW layer in the fabricated waveguides. Two routines were used to design the waveguides parameters, the transfer matrix method (TMM) and the semi-vectorial non-uniform finite difference method (NU-FDM). Attenuation as low as 3.5dB/cm was obtained for a 7 μm wide waveguide.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. V. Pelegrini, D. O. Carvalho, M. I. Alayo, and I. Pereyra "AlN antiresonant layer ARROW waveguides", Proc. SPIE 7598, Optical Components and Materials VII, 75981X (25 February 2010); https://doi.org/10.1117/12.842498
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Aluminum nitride

Silicon

Refractive index

Cladding

FT-IR spectroscopy

Sputter deposition

Back to Top