Support loss suppression in micromechanical resonators by the use of phononic band gap structures

Saeed Mohammadi; Ali A. Eftekhar; Abdelkrim Khelif; Ali Adibi

doi:10.1117/12.849038

24 February 2010 Support loss suppression in micromechanical resonators by the use of phononic band gap structures

Saeed Mohammadi, Ali A. Eftekhar, Abdelkrim Khelif, Ali Adibi

Proceedings Volume 7609, Photonic and Phononic Crystal Materials and Devices X; 76090W (2010) https://doi.org/10.1117/12.849038
Event: SPIE OPTO, 2010, San Francisco, California, United States

Abstract

By modifying the supporting structures of a conventional piezoelectric-on-substrate micromechanical (MM) resonator using phononic crystal (PC) slab structures with complete phononic band gaps (PBGs) the support loss in micromechanical resonators is suppressed and the quality factor of the fundamental extensional resonant mode is improved from approximately 1,200 to approximately 6,000. The conventional MM resonator and the PC resonators are both fabricated on the same chip and using the same fabrication process. The PC is made by etching a hexagonal (honeycomb) array of holes in a 15μm-thick slab of silicon. The radii of the holes are approximately 6.4μm and the spacing between the centers of the nearest holes is 15 μm. The conventional MM resonator is made of a rectangular structure with dimensions of 600 μm by 60 μm and the fundamental flexural and extensional modes of the structure in the smaller dimension are excited. In the third dimension, all the structures are made of a 15 μm silicon (Si) slab, a 100 nm layer of gold, a ~1 μm layer of zinc oxide, and a patterned 100 nm layer of aluminum electrodes stacked on top of each other to serve as the resonant mass and the transduction medium. The significant improvement obtained using the PC resonator structures makes them excellent candidates for next generation of MM resonators for wireless communication and sensing applications despite some minor remaining challenges.

Citation Download Citation

Saeed Mohammadi, Ali A. Eftekhar, Abdelkrim Khelif, and Ali Adibi "Support loss suppression in micromechanical resonators by the use of phononic band gap structures", Proc. SPIE 7609, Photonic and Phononic Crystal Materials and Devices X, 76090W (24 February 2010); https://doi.org/10.1117/12.849038

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available