Paper
9 April 2010 Dependence on boundary conditions for actuation characteristics of dielectric elastomer actuators
Author Affiliations +
Abstract
We present electro-mechanical characterizations of dielectric elastomer actuators (DEA) prepared from polystyrene- ethylene-butadiene-styrene (SEBS) with comparison to the commonly used VHB 4905 tape. This study discusses effects of boundary conditions, stiffness and voltage ramp rate on the actuation properties of both materials. Measurements on samples in pure-shear configuration were made with variation in both load and applied voltage, to achieve so-called '3D-plots'. A strong dependence of the actuation characteristics on the voltage ramp rate was observed, leading to a large shift in the 'optimum load' for VHB, which was not found for SEBS. This is due to the large difference in visco-elastic behavior between materials.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Matthias Kollosche, Hristiyan Stoyanov, Hülya Ragusch, and Guggi Kofod "Dependence on boundary conditions for actuation characteristics of dielectric elastomer actuators", Proc. SPIE 7642, Electroactive Polymer Actuators and Devices (EAPAD) 2010, 76422X (9 April 2010); https://doi.org/10.1117/12.847515
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dielectric elastomer actuators

Actuators

Polymers

Electrodes

Amplifiers

Electrical breakdown

Physics

Back to Top