Paper
7 April 2010 Embedded fiber Bragg sensors for damage identification in sandwich composites after impact
Drew A. Hackney, Kara J. Peters
Author Affiliations +
Abstract
The use and viability of fiber Bragg grating sensors in sandwich composite structures for the purpose of structural health monitoring under low velocity impact. Initially, a group of twelve specimens were tested to characterize the impact response of sandwich composite structures. Each specimen test consisted of repeated impacts at a constant impact energy to measure and observe damage progression. Once this was completed, a single optical fiber with a fiber Bragg grating was embedded in the structure between the core and the faceplate to and measured using a laser. The shift and deformation of the reflected spectrum from the fiber Bragg grating sensor resulting from each strike was analyzed and the corresponding strain was measured. The peak wavelength shift measurements did not have a strong correlation to the accumulation of damage in the sandwich laminate. However, the spectral distortion did evolve throughout the initial accumulation of damage in the laminate. Further analysis of the spectrum is needed to correlate the spectral response to the damage modes.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Drew A. Hackney and Kara J. Peters "Embedded fiber Bragg sensors for damage identification in sandwich composites after impact", Proc. SPIE 7648, Smart Sensor Phenomena, Technology, Networks, and Systems 2010, 76480B (7 April 2010); https://doi.org/10.1117/12.848351
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Composites

Fiber Bragg gratings

Sensors

Foam

Optical fibers

Distortion

Interfaces

Back to Top