Paper
10 September 2010 Investigation of the effect of fabrication-related disorders in subwavelength metal-dielectric-metal plasmonic waveguides
Author Affiliations +
Abstract
We theoretically investigate the effect of fabrication-related disorders on subwavelength metal-dielectric-metal plasmonic waveguides. We use a Monte Carlo method to calculate the roughness-induced excess attenuation coefficient with respect to a smooth waveguide. We find that the excess attenuation is mainly due to reflection from the rough surfaces. For small roughness height (δ<4nm), the excess optical power loss due to disorder is small compared to the material loss in a smooth waveguide. However, for large roughness height (δ>4nm), the excess attenuation increases rapidly and the propagation length of the optical mode is severely affected. We also find that the disorder attenuation due to reflection is maximized when the power spectral density of the disordered surfaces at the Bragg frequency is maximized. Finally, we show that increasing the modal confinement or decreasing the guide wavelength, increase the attenuation due to disorder.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Changjun Min and Georgios Veronis "Investigation of the effect of fabrication-related disorders in subwavelength metal-dielectric-metal plasmonic waveguides", Proc. SPIE 7757, Plasmonics: Metallic Nanostructures and Their Optical Properties VIII, 77573E (10 September 2010); https://doi.org/10.1117/12.861084
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Signal attenuation

Metals

Plasmonic waveguides

Absorption

Reflection

Monte Carlo methods

Back to Top