Paper
21 February 2011 Beam quality optimization of electrically pumped VECSELs for passive modelocking
W. P. Pallmann, M. Hoffmann, M. Miller, J. Baier, H. Moench, I. Dahhan, B. Witzigmann, M. Golling, Y. Barbarin, T. Südmeyer, U. Keller
Author Affiliations +
Abstract
Fundamental mode operation along with high output power is a major challenge for an electrically pumped VECSEL (EP-VECSEL) suitable for passive modelocking. We present an experimental study on the influence of the intermediate DBR reflectivity on the beam quality and the output power of EP-VECSELs. For designs with reflectivities of 90%, 82% and 71% the highest possible power for the best achievable beam quality was 15.1 mW (M2 = 1.1, 82% device). We can demonstrate that a correctly chosen intermediate DBR reflectivity is necessary for both good beam quality and high power, and that a trade-off in power has to be accepted.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
W. P. Pallmann, M. Hoffmann, M. Miller, J. Baier, H. Moench, I. Dahhan, B. Witzigmann, M. Golling, Y. Barbarin, T. Südmeyer, and U. Keller "Beam quality optimization of electrically pumped VECSELs for passive modelocking", Proc. SPIE 7919, Vertical External Cavity Surface Emitting Lasers (VECSELs), 79190I (21 February 2011); https://doi.org/10.1117/12.873823
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectivity

Mode locking

Output couplers

Optimization (mathematics)

Photonics

Optical pumping

Quantum wells

RELATED CONTENT

Femtosecond MIXSEL
Proceedings of SPIE (March 03 2014)
Picosecond MIXSEL for clocking applications
Proceedings of SPIE (March 03 2014)
Passively mode-locked electrically pumped VECSELs
Proceedings of SPIE (February 18 2013)
A wavelength tunable 2-ps pulse VECSEL
Proceedings of SPIE (February 14 2012)

Back to Top