Paper
21 February 2011 Improvement in viewing angle properties of top-emitting organic light-emitting devices
Bo-Ting Liou, Miao-Chan Tsai, Yi-Hsiang Huang, Fang-Ming Chen, Yu-Rui Lin, Yen-Kuang Kuo
Author Affiliations +
Abstract
The blue shift of viewing angle in the top-emitting organic light-emitting devices is discussed in this study. For the single-mode cavity, the device of anode metal/ m-MTDATA (40 nm)/ α-NPD (10 nm)/ Alq3 (47.6 nm)/ LiF (1 nm)/ Ag (20 nm) with the metal phase difference of 1.30 π has the minimum blue shift of viewing angle. For the double-mode cavity, the recombination area must be away from the cathode for the device with better performance. However, the double-mode cavity with only one recombination area still has worse FWHM and gets more serious the blue shift of viewing angle than the single-mode cavity. Therefore, the double-mode cavity with a recombination area at each antinode is performed, and the results prove that the blue shift of viewing angle and the FWHM are improved. Finally, we replace the emission layer with Alq3:DCM (0.01%) and adjust the main peak wavelength in the double-mode cavity by adjusting the thicknesses of the cavity. The results show that the FWHM and the blue shift of viewing angle obtain further improvement for the double-mode cavity with a recombination area at each antinode.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bo-Ting Liou, Miao-Chan Tsai, Yi-Hsiang Huang, Fang-Ming Chen, Yu-Rui Lin, and Yen-Kuang Kuo "Improvement in viewing angle properties of top-emitting organic light-emitting devices", Proc. SPIE 7935, Organic Photonic Materials and Devices XIII, 793515 (21 February 2011); https://doi.org/10.1117/12.874157
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metals

Organic light emitting diodes

Optical microcavities

Phase shifts

Laser induced fluorescence

OLED lighting

Reflectivity

Back to Top