Paper
19 April 2011 Low-cost passive sensors for monitoring corrosion in concrete structures
Author Affiliations +
Abstract
A passive sensor platform has been developed at the University of Texas at Austin to monitor corrosion of embedded reinforcement in concrete structures. The sensors are powered and interrogated in a wireless manner. Initial sensor designs used a sacrificial corroding steel wire to indicate the risk of corrosion within concrete. The wire was physically connected to the sensor circuitry and passed through the circuit protection layer. Consequently, it allowed contaminants to reach the circuit electric components causing corrosion and limiting the service life of the sensor. A novel sensor configuration that relies on wireless inductive coupling between a resonant circuit and the transducer element is presented. The non-contact design eliminates the breach concern and enhances the durability of the senor. Preliminary test results of the new design will be discussed in this paper.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ali E. Abu Yosef, Praveenkumar Pasupathy, Sharon L. Wood, and Dean P. Neikirk "Low-cost passive sensors for monitoring corrosion in concrete structures", Proc. SPIE 7983, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2011, 79831Q (19 April 2011); https://doi.org/10.1117/12.879893
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Corrosion

Passive sensors

Transducers

Chemical elements

Bridges

Resistance

Back to Top