Paper
25 April 2012 Brillouin fiber laser using As38Se62 suspended-core chalcogenide fiber
Author Affiliations +
Abstract
In this paper, an all-fiber Brillouin laser ring cavity using a 3-m-long suspended-core chalcogenide As38Se62 fiber is reported for the first time to our knowledge. For a nonresonant ring cavity with no servo-locking, a laser threshold power of 37 mW and an efficiency of 26 % were obtained for a fiber having a core diameter of 5 μm. The linewidth of the Brillouin fiber laser and the pump laser were respectively measured to be below 4 kHz, the resolution of our autocorrelator, and 250 kHz, thus showing the linewidth-narrowing nature of the Brillouin laser. This result paves the way to compact Brillouin lasers with low threshold power and good spectral purity. A full experimental Brillouin characterization is also reported. We measured a Brillouin gain spectrum of 14.2 MHz, a Brillouin gain coefficient of 5.6x10-9 m/W and a Brillouin frequency shift of 7.95 GHz in our fiber.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
K. Hey Tow, Y. Léguillon, P. Besnard, L. Brilland, J. Trolès, P. Toupin, D. Méchin, D. Trégoat, and M. Doisy "Brillouin fiber laser using As38Se62 suspended-core chalcogenide fiber", Proc. SPIE 8426, Microstructured and Specialty Optical Fibres, 842611 (25 April 2012); https://doi.org/10.1117/12.921821
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Chalcogenides

Fiber lasers

Optical amplifiers

Micro optical fluidics

Optical fibers

Polarization

Silica

Back to Top