Paper
30 November 2012 A laser-based measurement system for transparent surface forming
Author Affiliations +
Abstract
Because the forming process of transparent surface is entirely artificial, it is difficult to meet the requirements of real-time and high precision. In this paper, the laser monitoring system solution can solve this problem. This system consists of three parts, a laser, a CCD camera, and a computer. The laser beam is injected to the transparent surface, and received by the CCD camera. The image is processed by the computer in real-time. By the changes of laser spot during the forming process, a solution is proposed to calculate the difference between the two spot images, which determines the change of height. The experimental results show that when the transparent surface grows 1mm, the effective axial length changes 30 pixels. After multiple measurements, we obtain the relationship curve between the height of the transparent surface and effective axial length. According to the curve, we calculate the measurement error is 2.725%. The processing speed of computer is also measured. It can process 10 pictures per second. The algorithm reflects superiority in both accuracy and processing speed.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mingyan Li, Xinzhu Sang, Yang Sun, Binbin Yan, and Chongxiu Yu "A laser-based measurement system for transparent surface forming", Proc. SPIE 8558, Optoelectronic Imaging and Multimedia Technology II, 855803 (30 November 2012); https://doi.org/10.1117/12.999502
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Image processing

Error analysis

Laser systems engineering

Cameras

CCD cameras

Charge-coupled devices

Computing systems

Back to Top