Full chip implant correction with wafer topography OPC modeling in 2x nm bulk technologies

J-C. Michel; J-C. Le Denmat; E. Sungauer; F. Robert; E. Yesilada; A-M. Armeanu; J. Entradas; J. L. Sturtevant; T. Do; Y. Granik

doi:10.1117/12.2027291

1 October 2013 Full chip implant correction with wafer topography OPC modeling in 2x nm bulk technologies

J-C. Michel, J-C. Le Denmat, E. Sungauer, F. Robert, E. Yesilada, A-M. Armeanu, J. Entradas, J. L. Sturtevant, T. Do, Y. Granik

Author Affiliations +

Proceedings Volume 8880, Photomask Technology 2013; 88801J (2013) https://doi.org/10.1117/12.2027291
Event: SPIE Photomask Technology, 2013, Monterey, California, United States

Abstract

Ionic implantation photolithography step considered to be non critical started to be influenced by unwanted overexposure by wafer topography with technology node downscaling evolution [1], [2]. Starting from 2xnm technology nodes, implant patterns modulated on wafer by classical implant proximity effects are also influenced by wafer topography which can cause drastic pattern degradation [2], [3]. This phenomenon is expected to be attenuated by the use of anti-reflecting coating but it increases process complexity and involves cost and cycle time penalty. As a consequence, computational lithography solutions are currently under development in order to correct wafer topographical effects on mask [3]. For ionic implantation source Drain (SD) on Silicon bulk substrate, wafer topography effects are the consequence of active silicon substrate, poly patterns, STI stack, and transitions between patterned wafer stack. In this paper, wafer topography aware OPC modeling flow taking into account stack effects for bulk technology is presented. Quality check of this full chip stack aware OPC model is shown through comparison of mask computational verification and known systematic defectivity on wafer. Also, the integration of topographical OPC model into OPC flow for chip scale mask correction is presented with quality and run time penalty analysis.

Citation Download Citation

J-C. Michel, J-C. Le Denmat, E. Sungauer, F. Robert, E. Yesilada, A-M. Armeanu, J. Entradas, J. L. Sturtevant, T. Do, and Y. Granik "Full chip implant correction with wafer topography OPC modeling in 2x nm bulk technologies", Proc. SPIE 8880, Photomask Technology 2013, 88801J (1 October 2013); https://doi.org/10.1117/12.2027291

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available