Laser cleaning experiences on sculptures’ materials: terracotta, plaster, wood, and wax

Claudia Pelosi; D. Fodaro; Livia Sforzini; Angela Lo Monaco

doi:10.1117/12.2052812

28 November 2013 Laser cleaning experiences on sculptures’ materials: terracotta, plaster, wood, and wax

Claudia Pelosi, D. Fodaro, Livia Sforzini, Angela Lo Monaco

Proceedings Volume 9065, Fundamentals of Laser-Assisted Micro- and Nanotechnologies 2013; 90650X (2013) https://doi.org/10.1117/12.2052812
Event: Fundamentals of Laser Assisted Micro- and Nanotechnologies 2013, 2013, St. Petersburg, Russian Federation

Abstract

The focus of this paper is to show the work experiences with laser cleaning on sculptures made of terracotta, plaster, wood and wax. These materials exhibit peculiar features that often prevent the use of traditional cleaning procedures to remove the surface dirt, soot or carbonaceous deposits and other materials coming from environment or ancient conservative interventions. To overcome the difficulties in the cleaning of the above mentioned materials, laser technology was tested. The laser irradiation and cleaning tests were carried out with a Q-switched Nd:YAG system under the following conditions: wavelength 1064 nm and 532 nm; energy 4-28 mJ; pulse duration 10 ns; spot diameter 2-8 mm; frequency 5 Hz. The irradiated surfaces were analyzed before and after the laser tests, with the aid of a video microscope and a reflectance spectrophotometer, in order to evaluate the morphology and colour changes of the surfaces. Before starting with the cleaning intervention, some diagnostic analysis was performed on the sculptures in order to obtain the identification of the original materials and of the surface deposits. Concerning this, Fourier Transform Infrared spectroscopy, X-ray fluorescence spectroscopy, and internal micro stratigraphic analysis were performed. This research demonstrated that the laser cleaning is an effective method to remove the surface deposits preserving the original patina of the sculptures and the opacity of the wax. The results gathered in this work encourage to continue the research in order to better understand the interactions between the laser beam and the surfaces and to find the most appropriate laser conditions to clean the sculptures.

Citation Download Citation

Claudia Pelosi, D. Fodaro, Livia Sforzini, and Angela Lo Monaco "Laser cleaning experiences on sculptures’ materials: terracotta, plaster, wood, and wax", Proc. SPIE 9065, Fundamentals of Laser-Assisted Micro- and Nanotechnologies 2013, 90650X (28 November 2013); https://doi.org/10.1117/12.2052812

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available