Paper
12 May 2015 Blackbox imager characterization, from measurements to modeling range performance
Author Affiliations +
Abstract
Typically, the modeling of linear and shift-invariant (LSI) imaging systems requires a complete description of each subcomponent in order to estimate the final system transfer function. To validate the modeled behavior, measurements are performed on each component. When dealing with packaged systems, there are many situations where some, if not all, data is unknown. For these cases, the system is considered a blackbox, and system level measurements are used to estimate the transfer characteristics in order to model performance. This correspondence outlines the blackbox measured system component in the Night Vision Integrated Performance Model (NV-IPM). We describe how estimates of performance can be achieved with complete or incomplete measurements and how assumptions affect the final range. The blackbox measured component is the final output of a measurement characterization and is used to validate performance of delivered and prototype systems.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David P. Haefner, Stephen D. Burks, and Brian P. Teaney "Blackbox imager characterization, from measurements to modeling range performance", Proc. SPIE 9452, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XXVI, 945202 (12 May 2015); https://doi.org/10.1117/12.2180386
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal to noise ratio

Systems modeling

Interference (communication)

Performance modeling

Imaging systems

Modulation transfer functions

Visual process modeling

RELATED CONTENT


Back to Top