Paper
1 July 2015 A new fiber-tip Fabry-Perot interferometer and its application for pressure measurement
Author Affiliations +
Proceedings Volume 9655, Fifth Asia-Pacific Optical Sensors Conference; 965517 (2015) https://doi.org/10.1117/12.2184402
Event: Fifth Asia Pacific Optical Sensors Conference, 2015, Jeju, Korea, Republic of
Abstract
This paper reports a new silica fiber-tip Fabry-Perot interferometer with thin film and large surface area characteristic for high pressure and vacuum degree detection simultaneously, which is fabricated by etching a flat fiber tip into concave surface firstly, with subsequent arc jointing the concave fiber into a inline Fabry-Perot cavity, then drawing one surface of the F-P cavity into several micrometers scale by arc discharge and finally etching the surface into sub-micrometer scale integrally. As the silica fiber-tip Fabry-Perot interferometer film thickness could be tailored very thinly by HF acid solution, plus the surface area of thin film could be expanded during the chemical etching process, the variation of the bubble cavity length is very sensitive to the inner/outer pressure difference of the fiber-tip Fabry-Perot interferometer. Experimental result shows an high sensitivity of 780nm/MPa is feasible. Such configuration has the advantages of lowcost, ease of fabrication and compact size, which make it a promising candidate for pressure and vacuum measurement.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guanjun Wang, Shen Liu, Jing Zhao, Changrui Liao, Xizhen Xu, and Yiping Wang "A new fiber-tip Fabry-Perot interferometer and its application for pressure measurement", Proc. SPIE 9655, Fifth Asia-Pacific Optical Sensors Conference, 965517 (1 July 2015); https://doi.org/10.1117/12.2184402
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fabry–Perot interferometry

Etching

Silica

Thin films

Wet etching

Sensors

Structured optical fibers

Back to Top