Paper
24 October 2016 The application of pentaprism scanning technology on the manufacturing of M3MP
Author Affiliations +
Proceedings Volume 9682, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes; 96821A (2016) https://doi.org/10.1117/12.2245813
Event: Eighth International Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT2016), 2016, Suzhou, China
Abstract
The PSS (pentaprism scanning system) has advantages of simple structure, needless of reference flat, be able of on-site testing, etc, it plays an important role in large flat reflective mirror’s manufacturing, especially the high accuracy testing of low order aberrations. The PSS system measures directly the slope information of the tested flat surface. Aimed at the unique requirement of M3MP, which is the prototype mirror of the tertiary mirror in TMT (Thirty Meter Telescope) project, this paper analyzed the slope distribution of low order aberrations, power and astigmatism, which is very important in the manufacturing process of M3MP. Then the sample route lines of PSS are reorganized and new data process algorism is implemented. All this work is done to improve PSS’s measure sensitivity of power and astigmatism, for guiding the manufacturing process of M3MP.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Erhui Qi, Haixiang Hu, Haifei Hu, Glen Cole, Xiao Luo, Virginia Ford, and Xuejun Zhang "The application of pentaprism scanning technology on the manufacturing of M3MP", Proc. SPIE 9682, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 96821A (24 October 2016); https://doi.org/10.1117/12.2245813
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Manufacturing

Monochromatic aberrations

Optics manufacturing

Autocollimators

Prisms

Polishing

RELATED CONTENT

Fabrication and metrology study for M3MP of TMT
Proceedings of SPIE (October 24 2016)
Stress polishing of E ELT segment at LAM full...
Proceedings of SPIE (September 30 2011)
Active optics variable curvature mirrors for ELT laser guide...
Proceedings of SPIE (September 30 2011)
Prototype segments polishing and testing for ELT M1
Proceedings of SPIE (September 13 2012)
Innovative slicer design and manufacturing
Proceedings of SPIE (July 06 2006)

Back to Top