Electro-optical circuit board with single-mode glass waveguide optical interconnects

Lars Brusberg; Marcel Neitz; Dominik Pernthaler; Daniel Weber; Bogdan Sirbu; Christian Herbst; Christopher Frey; Marco Queisser; Markus Wöhrmann; Dionysios Manessis; Beatrice Schild; Hermann Oppermann; Yann Eichhammer; Henning Schröder; Andreas Håkansson; Tolga Tekin

doi:10.1117/12.2208103

15 March 2016 Electro-optical circuit board with single-mode glass waveguide optical interconnects

Lars Brusberg, Marcel Neitz, Dominik Pernthaler, Daniel Weber, Bogdan Sirbu, Christian Herbst, Christopher Frey, Marco Queisser, Markus Wöhrmann, Dionysios Manessis, Beatrice Schild, Hermann Oppermann, Yann Eichhammer, Henning Schröder, Andreas Håkansson, Tolga Tekin

Author Affiliations +

Proceedings Volume 9753, Optical Interconnects XVI; 97530J (2016) https://doi.org/10.1117/12.2208103
Event: SPIE OPTO, 2016, San Francisco, California, United States

Abstract

A glass optical waveguide process has been developed for fabrication of electro-optical circuit boards (EOCB). Very thin glass panels with planar integrated single-mode waveguides can be embedded as a core layer in printed circuit boards for high-speed board-level chip-to-chip and board-to-board optical interconnects over an optical backplane. Such singlemode EOCBs will be needed in upcoming high performance computers and data storage network environments in case single-mode operating silicon photonic ICs generate high-bandwidth signals [1]. The paper will describe some project results of the ongoing PhoxTroT project, in which a development of glass based single-mode on-board and board-to-board interconnection platform is successfully in progress. The optical design comprises a 500 μm thin glass panel (Schott D263Teco) with purely optical layers for single-mode glass waveguides. The board size is accommodated to the mask size limitations of the fabrication (200 mm wafer level process, being later transferred also to larger panel size). Our concept consists of directly assembling of silicon photonic ICs on cut-out areas in glass-based optical waveguide panels. A part of the electrical wiring is patterned by thin film technology directly on the glass wafer surface. A coupling element will be assembled on bottom side of the glass-based waveguide panel for 3D coupling between board-level glass waveguides and chip-level silicon waveguides. The laminate has a defined window for direct glass access for assembling of the photonic integrated circuit chip and optical coupling element. The paper describes the design, fabrication and characterization of glass-based electro-optical circuit board with format of (228 x 305) mm².

Citation Download Citation

Lars Brusberg, Marcel Neitz, Dominik Pernthaler, Daniel Weber, Bogdan Sirbu, Christian Herbst, Christopher Frey, Marco Queisser, Markus Wöhrmann, Dionysios Manessis, Beatrice Schild, Hermann Oppermann, Yann Eichhammer, Henning Schröder, Andreas Håkansson, and Tolga Tekin "Electro-optical circuit board with single-mode glass waveguide optical interconnects", Proc. SPIE 9753, Optical Interconnects XVI, 97530J (15 March 2016); https://doi.org/10.1117/12.2208103

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available