Paper
15 April 2016 Efficiency improvement of a cantilever-type energy harvester using torsional vibration
In-Ho Kim, Seon-Jun Jang, Jeong-Hoi Koo, Hyung-Jo Jung
Author Affiliations +
Abstract
In this paper, a piezoelectric vibrational energy harvester utilizing coupled bending and torsional vibrations is investigated. The proposed system consists of a cantilever-type substrate covered by the piezoelectric ceramic and a proof mass which is perpendicularly connected to the free end of the cantilever beam by a rigid bar. While the natural frequency and output voltage of the conventional system are affected by bending deformation of the piezoelectric plate, the proposed system makes use of its twisting deformation. The natural frequency of the device can be significantly decreased by manipulating the location of the proof mass on the rigid bar. In order to validate the performance of the proposed energy harvester, numerical simulations and vertical shaker tests are carried out. It is demonstrated that the proposed energy harvester can shift down its resonant frequency considerably and generate much higher output power than the conventional system. It is, therefore, concluded that the proposed energy harvester utilizing the coupled bending and torsional vibrations can be effectively applied to low-frequency vibration situations.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
In-Ho Kim, Seon-Jun Jang, Jeong-Hoi Koo, and Hyung-Jo Jung "Efficiency improvement of a cantilever-type energy harvester using torsional vibration", Proc. SPIE 9799, Active and Passive Smart Structures and Integrated Systems 2016, 97990N (15 April 2016); https://doi.org/10.1117/12.2222019
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Energy harvesting

Energy efficiency

Neodymium

Numerical simulations

Manufacturing

Mechanical engineering

Prototyping

Back to Top