Paper
31 March 1995 High-energy high-average power pulsed hf/df chemical laser
Henri Brunet, Michel Mabru, Francois Voignier
Author Affiliations +
Proceedings Volume 2502, Gas Flow and Chemical Lasers: Tenth International Symposium; (1995) https://doi.org/10.1117/12.204942
Event: Gas Flow and Chemical Lasers: Tenth International Symposium, 1994, Friedrichshafen, Germany
Abstract
The compact, repetitively pulsed HF chemical laser built 2 years ago has been modified to increase the output laser energy. The discharge volume is now 1.4 1 instead of 0.54 1 for the previous electric discharge. Due to high voltage limitation, the discharge gap was only slightly increased. The discharge width along the flow direction was increased from 4 to 8 cm. To achieve an easily usable beam, a novel optical configuration consisting of two passes with 2 folding mirrors has been used. It gives a 35 X 35 mm2 square output beam. To date, a maximum output laser energy up to 12 J per pulse was obtained at the HF wavelength using C2H6 as the hydrogen donor. At DF wavelength the energy per pulse was about 3 J using D2. In repetitive operation, the repetition rate was limited to about 65 Hz due to the available flow rate of the gas loop. The average power obtained was 610 W.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Henri Brunet, Michel Mabru, and Francois Voignier "High-energy high-average power pulsed hf/df chemical laser", Proc. SPIE 2502, Gas Flow and Chemical Lasers: Tenth International Symposium, (31 March 1995); https://doi.org/10.1117/12.204942
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Pulsed laser operation

Laser energy

Chemical lasers

Hydrogen fluoride lasers

Mirrors

Lasers

Laser resonators

Back to Top