Paper
5 October 1995 Video camera zoom lens design using lens modules
Sung Chan Park, KeunBae Kim
Author Affiliations +
Abstract
This paper presents the procedures for an initial design containing the first and third order aberrations of a four-group, rear focus video camera zoom lens using lens modules, and the real lens design from an initial design. Lens modules in the zoom system can explicitly describe the first and third order properties of each group without detailed design. The optimum initial design with a zoom ratio of about 10X and a focal length range of 6 to 60 mm is derived by assigning appropriate first and third order aberrations to each module along with the specific constraints required for optimization. For a real lens design of each group, we set up the simultaneous equations for the first and third order aberrations, and the solutions result in the optical systems which satisfy the properties of original lens modules. As a result, the design of a zoom system using lens modules is broken down into the simple problem of designing the individual groups to satisfy sets of the first and third order properties, and quickly provides the optimum system.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sung Chan Park and KeunBae Kim "Video camera zoom lens design using lens modules", Proc. SPIE 2539, Zoom Lenses, (5 October 1995); https://doi.org/10.1117/12.222830
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Zoom lenses

Lens design

Monochromatic aberrations

Video

Cameras

Chemical elements

Distortion

RELATED CONTENT

Aspheric technology for zoom lenses (Invited Paper)
Proceedings of SPIE (October 20 1992)
Lens Design Short Course
Proceedings of SPIE (November 07 1983)
Zoom system design of 14X using optimized lens modules
Proceedings of SPIE (September 25 1997)
Design issues of a hyperfield fisheye lens
Proceedings of SPIE (October 22 2004)

Back to Top