Paper
8 May 2012 Layered polymer: inorganic composite waveguides for biosensor applications
Jussi Hiltunen, Meng Wang, Christina Liedert, Sanna Aikio, Noriyuki Masuda, Stuart Pearce, Martin Charlton, Pentti Karioja
Author Affiliations +
Abstract
In this work, we investigate the usability of layered polymer - inorganic composite waveguides for label-free sensing of surface bound bioreactions in an aqueous environment. The waveguide structure consists of a nanoimprint fabricated polymeric inverted rib waveguide with a sputtered Ta2O5 thin film on top. The interaction of the optical field with the surface is increased as a consequence of the mode profile localization near the surface, when high-index coating is deposited on a low-index waveguide. Young interferometer configuration with reference and sensors waveguide arms was utilized in sensor chips. Light from a laser source was end-fire coupled into the chips and interference pattern produced by the outcoupled light was investigated. External μ-fluidic pump was used to produce the analyte flow. Ambient refractive index change was characterized by applying DI-water with varying glucose concentration on waveguides. With the waveguide length of 1 cm a detection limit in the order of 10-7 - 10-6 refractive index unit (RIU) was achieved. Specific binding reactions on the surface were investigated with C - reactive protein (CRP) antibodies and antigens.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jussi Hiltunen, Meng Wang, Christina Liedert, Sanna Aikio, Noriyuki Masuda, Stuart Pearce, Martin Charlton, and Pentti Karioja "Layered polymer: inorganic composite waveguides for biosensor applications", Proc. SPIE 8427, Biophotonics: Photonic Solutions for Better Health Care III, 84270I (8 May 2012); https://doi.org/10.1117/12.922267
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Refractive index

Polymers

Polymer multimode waveguides

Coating

Sensors

Interferometers

RELATED CONTENT

Polymeric slot waveguide for photonics sensing
Proceedings of SPIE (December 23 2016)
Inkjet printed single-mode waveguides on hot-embossed foils
Proceedings of SPIE (September 24 2015)
Polymer waveguide based biosensor
Proceedings of SPIE (November 18 2008)
Photodefined polymeric photonic materials and processes
Proceedings of SPIE (December 12 2003)
UV-imprinting of single-mode polymeric waveguides
Proceedings of SPIE (May 31 2011)

Back to Top