Paper
11 January 1987 Realisation Of Polarisation Sensitive And Frequency Selective Surfaces On Microwave Reflectors By Laser Evaporation
R. Halm, Th. Kupper, A. Fischer
Author Affiliations +
Proceedings Volume 0803, Micromachining of Elements with Optical and Other Submicrometer Dimensional and Surface Specifications; (1987) https://doi.org/10.1117/12.941272
Event: Fourth International Symposium on Optical and Optoelectronic Applied Sciences and Engineering, 1987, The Hague, Netherlands
Abstract
Gridded reflectors are used on communication satellites antennas to provide frequency reuse in dual linear polarisation mode of operation. The polarisation sensitive surface consists of metallic strips, forming a grid with width and spacings of the order of 0.1 mm. The use of frequency-selective surface (FSS) subreflectors allows the simultaneous generation of different microwave beams with the same main reflector. Such a reflector will require a structure of conductive arrays of either dipoles, rings, squares or square loops with typical dimensions of the order of 3-6 mm. Optimisation of the electrical design leads to critical dimensioning of these structures. By direct ablation of an aluminium surface coating by means of laser evaporation, high accuracies can be achieved. The major requirements were to minimize thermal damage of the substrate material and to produce dimensionally accurate grids. Experiments were carried out using a pulsed TEA-CO2 laser and a Q-switched Alexandrite laser. Details of the experimental set-up and conditions are described.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. Halm, Th. Kupper, and A. Fischer "Realisation Of Polarisation Sensitive And Frequency Selective Surfaces On Microwave Reflectors By Laser Evaporation", Proc. SPIE 0803, Micromachining of Elements with Optical and Other Submicrometer Dimensional and Surface Specifications, (11 January 1987); https://doi.org/10.1117/12.941272
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectors

Metals

Alexandrite lasers

Aluminum

Polarization

Coating

Pulsed laser operation

RELATED CONTENT

Welding Of Thin Sheet Metals
Proceedings of SPIE (April 10 1989)
Metal processing with ultrashort laser pulses
Proceedings of SPIE (August 16 2000)

Back to Top