Paper
23 February 2006 Negative branch hybrid resonator for COIL
Jürgen Handke, Thomas Hall, Frank Duschek, Karin Grünewald
Author Affiliations +
Abstract
A rectangular negative branch off-axis hybrid resonator was coupled to a 10-kW class Chemical Oxygen-Iodine Laser (COIL). Various schemes of geometrical coupling between resonator and gain medium were investigated. The extracted power was 6.6 kW and reached about 70% of the output power for the COIL device in an optimized conventional stable resonator configuration. Experimentally measured margins for the sensitivity of resonator setup and alignment were found in close agreement with numerical calculations. Power density distributions were measured in the near field and in the far field. The divergence of the emitted laser beam in the unstable direction was lower than 2 times diffraction limited.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jürgen Handke, Thomas Hall, Frank Duschek, and Karin Grünewald "Negative branch hybrid resonator for COIL", Proc. SPIE 6101, Laser Beam Control and Applications, 610124 (23 February 2006); https://doi.org/10.1117/12.669691
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resonators

Mirrors

Chemical oxygen iodine lasers

Diffraction

Chemical lasers

Laser resonators

Reflectors

RELATED CONTENT

Near-diffraction limited high-power COIL emission
Proceedings of SPIE (March 23 2005)
Hybrid resonator configurations for COIL
Proceedings of SPIE (June 07 2006)
Unstable resonator for COIL
Proceedings of SPIE (January 25 2001)
Double-pass hybrid resonator for COIL
Proceedings of SPIE (April 17 2009)
Forward-backward mode coupled unstable resonator
Proceedings of SPIE (April 04 1997)
Novel unstable resonator for chemical oxygen-iodine laser
Proceedings of SPIE (December 22 1998)

Back to Top