Innovations in high power fiber laser applications

Eckhard Beyer; Achim Mahrle; Matthias Lütke; Jens Standfuss; Frank Brückner

doi:10.1117/12.910899

15 February 2012 Innovations in high power fiber laser applications

Eckhard Beyer, Achim Mahrle, Matthias Lütke, Jens Standfuss, Frank Brückner

Proceedings Volume 8237, Fiber Lasers IX: Technology, Systems, and Applications; 823717 (2012) https://doi.org/10.1117/12.910899
Event: SPIE LASE, 2012, San Francisco, California, United States

Abstract

Diffraction-limited high power lasers represent a new generation of lasers for materials processing, characteristic traits of which are: smaller, cost-effective and processing "on the fly". Of utmost importance is the high beam quality of fiber lasers which enables us to reduce the size of the focusing head incl. scanning mirrors. The excellent beam quality of the fiber laser offers a lot of new applications. In the field of remote cutting and welding the beam quality is the key parameter. By reducing the size of the focusing head including the scanning mirrors we can reach scanning frequencies up to 1.5 kHz and in special configurations up to 4 kHz. By using these frequencies very thin and deep welding seams can be generated experienced so far with electron beam welding only. The excellent beam quality of the fiber laser offers a high potential for developing new applications from deep penetration welding to high speed cutting. Highly dynamic cutting systems with maximum speeds up to 300 m/min and accelerations up to 4 g reduce the cutting time for cutting complex 2D parts. However, due to the inertia of such systems the effective cutting speed is reduced in real applications. This is especially true if complex shapes or contours are cut. With the introduction of scanner-based remote cutting systems in the kilowatt range, the effective cutting speed on the contour can be dramatically increased. The presentation explains remote cutting of metal foils and sheets using high brightness single mode fiber lasers. The presentation will also show the effect of optical feedback during cutting and welding with the fiber laser, how those feedbacks could be reduced and how they have to be used to optimize the cutting or welding process.

Citation Download Citation

Eckhard Beyer, Achim Mahrle, Matthias Lütke, Jens Standfuss, and Frank Brückner "Innovations in high power fiber laser applications", Proc. SPIE 8237, Fiber Lasers IX: Technology, Systems, and Applications, 823717 (15 February 2012); https://doi.org/10.1117/12.910899

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available