A novel approach to characterize trench depth and profile using the 3D tilt capability of a critical dimension-scanning electron microscope at 65nm technology mode

R. Srivastava; P. Yelehanka; H. A. Kek; S. L. Ng; V. Srinivasan; R. Peltinov

doi:10.1117/12.659717

24 March 2006 A novel approach to characterize trench depth and profile using the 3D tilt capability of a critical dimension-scanning electron microscope at 65nm technology mode

R. Srivastava, P. Yelehanka, H. A. Kek, S. L. Ng, V. Srinivasan, R. Peltinov

Author Affiliations +

Proceedings Volume 6152, Metrology, Inspection, and Process Control for Microlithography XX; 61524I (2006) https://doi.org/10.1117/12.659717
Event: SPIE 31st International Symposium on Advanced Lithography, 2006, San Jose, California, United States

Abstract

The use of dual-damascene (DD) technique for integration of Cu with low-k dielectric films has introduced new issues and challenges for the plasma etching processes. The two big challenges are: precise critical dimension (CD) control and good etch rate control over trench formation. Many details of the trench etch, such as Trench Depth, bottom rounding and sidewall smoothness have an effect on the device performance. One of the most important trench etch parameters is the trench depth. Proper control of the etch process to obtain the desired trench depth will directly impact the RC delay of the integrated circuit. There are several methods used in measuring trench depth and analyzing the trench profile. The most direct method will be to perform a cross-sectional analysis but this process is destructive. Other non-destructive conventional methods require physical contact with the wafer during measurement. For example: atomic force microscopy, high resolution profiler, etc. In this paper, we study the feasibility of using Applied Materials (AMAT) VeritySEM's 3D capabilities to characterize the trench depth and profiles without physically contacting the wafer. The main advantage of using a CDSEM tool to perform profile analysis is the productivity factor. This analysis can take place while also performing traditional CD measurement. This will eliminate the amount of queue time required on a conventional tool for profile measurement. As a result, an "in-situ" robust profile measurement recipe with good repeatability will improve the efficiency of the fab operations. In addition this approach is nondestructive and does not need any physical contact to the wafer.

Citation Download Citation

R. Srivastava, P. Yelehanka, H. A. Kek, S. L. Ng, V. Srinivasan, and R. Peltinov "A novel approach to characterize trench depth and profile using the 3D tilt capability of a critical dimension-scanning electron microscope at 65nm technology mode", Proc. SPIE 6152, Metrology, Inspection, and Process Control for Microlithography XX, 61524I (24 March 2006); https://doi.org/10.1117/12.659717

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available