Validity of the Hopkins approximation in simulations of hyper-NA (NA>1) line-space structures for an attenuated PSM mask

Andreas Erdmann; Giuseppe Citarella; Peter Evanschitzky; Hans Schermer; Vicky Philipsen; Peter De Bisschop

doi:10.1117/12.655561

15 March 2006 Validity of the Hopkins approximation in simulations of hyper-NA (NA>1) line-space structures for an attenuated PSM mask

Andreas Erdmann, Giuseppe Citarella, Peter Evanschitzky, Hans Schermer, Vicky Philipsen, Peter De Bisschop

Author Affiliations +

Proceedings Volume 6154, Optical Microlithography XIX; 61540G (2006) https://doi.org/10.1117/12.655561
Event: SPIE 31st International Symposium on Advanced Lithography, 2006, San Jose, California, United States

Abstract

In our previous work we have shown that as the NA of a lithographic projection system increases some of the simulation assumptions that are traditionally made - such as the so-called Hopkins assumption, i.e. the assumption that diffraction at the mask is independent of the angle of incidence of the illuminating light waves - break down, at least in some cases. Reliable simulation results will then only be obtained if this Hopkins assumption is eliminated, i.e. when the diffraction effect is reevaluated for each incident direction. The differences in the results between two such simulations, one using the Hopkins approach, the other with this assumption removed, have been demonstrated to be very significant in some case, but today there is no clear understanding when the removal of the Hopkins assumption is essential: a systematic study is not available. As simulations without the Hopkins approximation are significantly more time consuming than simulations done under the Hopkins assumption, a better understanding of which model can or must be used under which circumstances, would be of significant practical importance. The aim of this paper is to provide such a more systematic study for the case of 6% attenuated PSM with line/space structures targeting at a 45 nm resist linewidth for a variety of pitches, for a NA = 1.2 water immersion system. Standard lithographic metrics such as process windows will be used to compare the two simulation approaches. All this work will be done taking the mask topography and optical material parameters into account. As the polarization state of the mask-illumination will also greatly affect the imaging quality at hyper-NA, we will compare the results for different polarization states and illumination modes.

Citation Download Citation

Andreas Erdmann, Giuseppe Citarella, Peter Evanschitzky, Hans Schermer, Vicky Philipsen, and Peter De Bisschop "Validity of the Hopkins approximation in simulations of hyper-NA (NA>1) line-space structures for an attenuated PSM mask", Proc. SPIE 6154, Optical Microlithography XIX, 61540G (15 March 2006); https://doi.org/10.1117/12.655561

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available