Paper
12 July 2006 CGH null test design and fabrication for off-axis aspherical mirror tests
Min Wang, Daniel Asselin, Patrice Topart, Jonny Gauvin, Philippe Berlioz, Bernd Harnisch
Author Affiliations +
Proceedings Volume 6342, International Optical Design Conference 2006; 63421Y (2006) https://doi.org/10.1117/12.692234
Event: International Optical Design Conference 2006, 2006, Vancouver, BC, Canada
Abstract
A null-lens based on a Computer Generated Hologram (CGH) is designed to test the primary off-axis aspherical mirror of the GAIA space telescope. This custom-designed and fabricated CGH includes five zones (null CGH, alignment CGH, and beam-projection CGH) on the same substrate. The optical test configuration is simple and the designed five-zones CGHs can simultaneously provide the aberrated wavefront correction for null tests, CGH alignment with a commercial interferometer, pre-positioning of the mirror under test in a cryogenic chamber, and isolation of the diffraction orders in the test setup. Positioning of the five zones with respect to each other is extremely critical for the success of this custom-made CGH null testing. For this reason, the fringes of all five zones were manufactured on a single photolithographic mask. With INO's special micro-fabrication processes, including its photolithographic, etching, and coating technologies, this 4.5-inch in diameter CGH was successfully made. The RMS wavefront error is estimated at 7.33 nm for the fabricated null CGH.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Min Wang, Daniel Asselin, Patrice Topart, Jonny Gauvin, Philippe Berlioz, and Bernd Harnisch "CGH null test design and fabrication for off-axis aspherical mirror tests", Proc. SPIE 6342, International Optical Design Conference 2006, 63421Y (12 July 2006); https://doi.org/10.1117/12.692234
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Computer generated holography

Mirrors

Wavefronts

Diffraction

Interferometers

Off axis mirrors

Optical fabrication

RELATED CONTENT

Design and fabrication of CGH for 600mm diameter SiC primary...
Proceedings of SPIE (September 27 2016)
The method to reduce the spinal error in the aspheric...
Proceedings of SPIE (September 27 2016)
Fabrication and testing of the first 8.4 m off axis...
Proceedings of SPIE (July 19 2010)
Modified alignment CGHs for aspheric surface test
Proceedings of SPIE (August 21 2009)

Back to Top