Micropolarizer arrays in the MWIR for snapshot polarimetric imaging

S. A. Kemme; A. A. Cruz-Cabrera; P. Nandy; R. R. Boye; J. R. Wendt; T. R. Carter; S. Samora

doi:10.1117/12.720036

3 May 2007 Micropolarizer arrays in the MWIR for snapshot polarimetric imaging

S. A. Kemme, A. A. Cruz-Cabrera, P. Nandy, R. R. Boye, J. R. Wendt, T. R. Carter, S. Samora

Proceedings Volume 6556, Micro (MEMS) and Nanotechnologies for Defense and Security; 655604 (2007) https://doi.org/10.1117/12.720036
Event: Defense and Security Symposium, 2007, Orlando, Florida, United States

Abstract

We report on the design, fabrication, and simulation of a four-state pixelated subwavelength optical device that enables mid-wave infrared (MWIR) or long-wave infrared (LWIR) snapshot polarimetric imaging. The polarization information can help to classify imaged materials and identify objects of interest for remote sensing and military applications. The fabricated pixelated polarizers have measured extinction ratios larger than 100:1 for pixel sizes greater than 9 microns by 9 microns, with transmitted signals greater than 50%. That exceeds, by 7 times, previously reported device extinction ratios for 15 micron by 15 micron pixels. Traditionally, sequential polarimetric imaging sensors produce scenes with polarization information through a series of assembled images. Snapshot polarimetric imaging collects the spatial distribution of all four Stokes' parameters simultaneously. In this way any noise due to scene movement from one frame to the next is eliminated. In this paper, we will quantify near-field and diffractive effects of the finite pixel apertures upon detection. We have designed and built an experimental setup that models a pixel within a focal plane array (FPA) to measure crosstalk from adjacent gold wiregrid micropolarizers. This configuration simulates a snapshot polarization imaging device where the two substrates are stacked; micropolarizer array substrate on top of an FPA. Modeling and measured data indicate crosstalk between the adjacent pixels up to a few microns behind the polarizer plane. Crosstalk between adjacent pixels increases uncertainty in the measured polarization states in a scene of interest. Measured and simulated data confirm that the extinction ratio of a micropolarizer pixel in a super-cell will be reduced by 17% when moving the FPA from 0.5 microns to 1.0 microns away from the polarizer. These changes in extinction ratio are significant since typical glue separation is on the order of 10 microns.

Citation Download Citation

S. A. Kemme, A. A. Cruz-Cabrera, P. Nandy, R. R. Boye, J. R. Wendt, T. R. Carter, and S. Samora "Micropolarizer arrays in the MWIR for snapshot polarimetric imaging", Proc. SPIE 6556, Micro (MEMS) and Nanotechnologies for Defense and Security, 655604 (3 May 2007); https://doi.org/10.1117/12.720036

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available