Full Content is available to subscribers

Subscribe/Learn More  >
Proceedings Article

Patterned defect and CD metrology by TSOM beyond the 22-nm node

[+] Author Affiliations
Abraham Arceo, Benjamin Bunday, Victor Vartanian

SEMATECH (United States)

Ravikiran Attota

NIST (United States)

Proc. SPIE 8324, Metrology, Inspection, and Process Control for Microlithography XXVI, 83240E (March 29, 2012); doi:10.1117/12.917236
Text Size: A A A
From Conference Volume 8324

  • Metrology, Inspection, and Process Control for Microlithography XXVI
  • Alexander Starikov
  • San Jose, California | February 12, 2012


Through-focus scanning optical microscopy (TSOM) is a novel method [1-8] that allows conventional optical microscopes to collect dimensional information down to the nanometer level by combining 2D optical images captured at several through-focus positions, transforming conventional optical microscopes into truly 3D metrology tools for nanoscale to microscale dimensional analysis with nanometer scale sensitivity. Although not a resolution enhancement method, it has been shown to provide lateral and vertical measurement sensitivity of less than a nanometer [5], comparable to the dimensional measurement sensitivity of other critical dimension (CD) metrology tools. The technique is capable of measuring features far beyond the theoretical resolution limits of optical microscopy, because it can capture much richer data at many z-heights (i.e., through focus). Additionally, TSOM appears to decouple the measurement of profile dimensional changes at the nanoscale, such as small perturbations in sidewall angle and height, with little or no ambiguity, and may be able to analyze target dimensions ranging from as small as 10 nm up to many microns with similar nanometer-scale sensitivity. Furthermore, previous simulation and experimental work has shown this method to be applicable to a variety of target materials and structures, such as nanoparticles, semiconductor memory features, and buried structures under transparent films. Additionally, this relatively simple technique is inexpensive and has high throughput, making it attractive for a variety of semiconductor metrology applications, such as CD, photomask, overlay, and defect metrologies [8]. In-line defect metrology is continuously challenged by the aggressive pace of device scaling. It is expected that the conventional brightfield techniques currently used in semiconductor manufacturing will not be able to meet defect inspection requirements near the 11 nm node. Electron beam-based inspection is able to meet resolution limits well below the 11 nm node, but operates at a significantly lower throughput. It has therefore become necessary to explore alternative approaches that have the potential to meet both resolution and throughput requirements. This work will present TSOM results of simulations and supporting experiments to demonstrate the metrology application of TSOM to features at the ITRS 22 nm node [9], including measurement of linewidths down to 10 nm, showing the ability to measure changes in line height, sidewall angle, and pitch variations. By extension, these results will show the feasibility of applying TSOM to important contemporary metrology problems in measuring doublepatterned features and FinFETs. Additionally, we will theoretically explore the use of TSOM to inspect defects on gatelevel arrays with different CDs down to 15 nm. This theoretical work consisted of modeling the optical response of cross-sectional perturbations and several patterned defect types and sizes using illumination wavelengths ranging from visible to deep ultraviolet (DUV) under different illumination polarizations. The results indicate that TSOM may be able to detect small CD and profile changes in fins of FinFET structures as well as defects that currently challenge conventional brightfield optical methods. The simulation results also indicate an added advantage of the TSOM method to differentiate certain types of defects and their orientations by exhibiting different optical intensity patterns. These results will provide insight into the feasibility of TSOM for CD and yield enhancement metrology.

© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Abraham Arceo ; Benjamin Bunday ; Victor Vartanian and Ravikiran Attota
"Patterned defect and CD metrology by TSOM beyond the 22-nm node", Proc. SPIE 8324, Metrology, Inspection, and Process Control for Microlithography XXVI, 83240E (March 29, 2012); doi:10.1117/12.917236; http://dx.doi.org/10.1117/12.917236

Access This Proceeding
Sign in or Create a personal account to Buy this proceeding ($15 for members, $18 for non-members).



Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging & repositioning the boxes below.

Related Book Chapters

Topic Collections

  • Don't have an account?
  • Subscribe to the SPIE Digital Library
  • Create a FREE account to sign up for Digital Library content alerts and gain access to institutional subscriptions remotely.
Access This Proceeding
Sign in or Create a personal account to Buy this proceeding ($15 for members, $18 for non-members).
Access This Proceeding
Sign in or Create a personal account to Buy this article ($15 for members, $18 for non-members).
Access This Chapter

Access to SPIE eBooks is limited to subscribing institutions and is not available as part of a personal subscription. Print or electronic versions of individual SPIE books may be purchased via SPIE.org.