Paper
27 May 1996 Contamination damage in pulsed 1-μm lasers
Floyd E. Hovis, Bart A. Shepherd, Christopher T. Radcliffe, Henry A. Maliborski
Author Affiliations +
Abstract
Although thin film coating technology has evolved to the point that damage thresholds of several hundred MW/cm2 can be routinely achieved, sealed laser systems which must be operated for extended times or at elevated temperatures frequently experience failure due to optical damage. This damage, which is frequently due to the build up of gas phase contaminants in the sealed optical compartment, occurs in spite of the fact that the lasers were designed such that the intracavity intensities are only a few tens of MW/cm2. Since much of our work involves designing Q-switched Nd:YAG lasers that operates over extreme environmental conditions, eliminating contamination damage at 1 micrometers is of particular interest to us. In this paper we will describe our current understanding of contamination induced damage at 1 micrometers and give an overview of the processes that can be used to eliminate such damage in fielded systems.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Floyd E. Hovis, Bart A. Shepherd, Christopher T. Radcliffe, and Henry A. Maliborski "Contamination damage in pulsed 1-μm lasers", Proc. SPIE 2714, 27th Annual Boulder Damage Symposium: Laser-Induced Damage in Optical Materials: 1995, (27 May 1996); https://doi.org/10.1117/12.240348
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Contamination

Silicon

Nitrogen

Optical damage

Oxygen

Laser development

Laser induced damage

Back to Top