Paper
7 February 2003 MMT adaptive secondary: performance evaluation and field testing
Author Affiliations +
Abstract
The adaptive secondary for the MMT (called MMT336) is the first mirror of its kind. It was designed to allow the application of wavefront corrections (including tip-tilt) directly at the secondary mirror location. Among the advantages of such a choice for adaptive optics operation are higher throughput, lower emissivity, and simpler optical setup. The mirror also has capabilities that are not found in most correctors including internal position feedback, large stroke (to allow chopping) and provision for absolute position calibration. The 336 actuator adaptive secondary for MMT has been used daily for over one year in our adaptive optics testing facility which has built confidence in the mirror operation and allowed us to interface it to the MMT adaptive optics system. Here we present the most recent data acquired in the lab on the mirror performance. By using interferometer measurements we were able to achieve a residual surface error of approximately 40nm rms. Coupling the mirror with a Shack-Hartmann wavefront sensor we obtained a stable closed loop operation with a -3dB closed loop bandwidth of approximately 30Hz limited by the wavefront sensor frame rate. We also present some preliminary results that show a 5Hz, 90% duty cycle, ±5 arcsec chopping of the mirror. Finally the experience gained and the problems encountered during the first light adaptive optics run at the telescope will be briefly summarized. A more extensive report can be found in another paper also presented at this conference.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guido Brusa, Armando Riccardi, Piero Salinari, Francois P. Wildi, Michael Lloyd-Hart, Hubert M. Martin, Richard Allen, Donald Fisher, Doug L. Miller, Roberto Biasi, Daniele Gallieni, and Fabio Zocchi "MMT adaptive secondary: performance evaluation and field testing", Proc. SPIE 4839, Adaptive Optical System Technologies II, (7 February 2003); https://doi.org/10.1117/12.459786
Lens.org Logo
CITATIONS
Cited by 30 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Adaptive optics

Telescopes

Actuators

Wavefront sensors

Wavefronts

Optical testing

RELATED CONTENT

Residual wavefront control of segmented mirror telescopes
Proceedings of SPIE (August 29 2022)
Adaptive optics system for a 1.5-m solar telescope
Proceedings of SPIE (January 29 2002)
LINC NIRVANA how to get a 23 m wavefront...
Proceedings of SPIE (October 25 2004)
The Giant Magellan Telescope phasing system
Proceedings of SPIE (September 13 2012)
Adaptive optics: choices and optimization
Proceedings of SPIE (August 25 1993)

Back to Top