Development of waveguide sensors for the application in photoacoustic tomography

R. Nuster; G. Paltauf; H. Ditlbacher; P. Burgholzer

doi:10.1117/12.729470

18 July 2007 Development of waveguide sensors for the application in photoacoustic tomography

R. Nuster, G. Paltauf, H. Ditlbacher, P. Burgholzer

Proceedings Volume 6631, Novel Optical Instrumentation for Biomedical Applications III; 663106 (2007) https://doi.org/10.1117/12.729470
Event: European Conferences on Biomedical Optics, 2007, Munich, Germany

Abstract

Photoacoustic tomography (PAT) is based on the recording of the acoustic signals excited by illumination of a sample with short laser pulses. The detection of the acoustic signals can be realized either by small (point-like) detectors or by extended integrating detectors. The commonly applied detectors are arrays of small ultrasound transducers or single detectors scanning around the object. A rather new approach is the use of extended integrating detectors for acoustic wave monitoring to avoid the blurring effects of finite aperture sensors in PAT. The present study is focused on the development of integrating line detectors. This is implemented by a combination of a planar waveguide (PWG) and a common path polarization interferometer (CPPI). An arriving acoustic pulse modifies the birefringence of the waveguide material. This leads to a change of phase difference between two orthogonally polarized fundamental waveguide modes, which is converted into a modulation of intensity by an analyzer. The obtained noiseequivalent pressure value is ~1bar without averaging which is rather poor compared to other methods but it can be increased by using polymer waveguide materials with better relative elasto-optic coupling coefficients than polystyrene (C–-19•10^-7 bar^-1). The guiding polystyrene film had a thickness of 1.3 μm and was fabricated with a spin coating method. The bandwidth of the PWG sensor was limited only by the detection electronics to 125 MHz.

Citation Download Citation

R. Nuster, G. Paltauf, H. Ditlbacher, and P. Burgholzer "Development of waveguide sensors for the application in photoacoustic tomography", Proc. SPIE 6631, Novel Optical Instrumentation for Biomedical Applications III, 663106 (18 July 2007); https://doi.org/10.1117/12.729470

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available