Design and development of a 329-segment tip-tilt piston mirror array for space-based adaptive optics

Jason B. Stewart; Thomas G. Bifano; Paul Bierden; Steven Cornelissen; Timothy Cook; B. Martin Levine

doi:10.1117/12.651373

23 January 2006 Design and development of a 329-segment tip-tilt piston mirror array for space-based adaptive optics

Jason B. Stewart, Thomas G. Bifano, Paul Bierden, Steven Cornelissen, Timothy Cook, B. Martin Levine

Proceedings Volume 6113, MEMS/MOEMS Components and Their Applications III; 61130O (2006) https://doi.org/10.1117/12.651373
Event: MOEMS-MEMS 2006 Micro and Nanofabrication, 2006, San Jose, California, United States

Abstract

We report on the development of a new MEMS deformable mirror (DM) system for the hyper-contrast visible nulling coronagraph architecture designed by the Jet Propulsion Laboratory for NASA's Terrestrial Planet Finding (TPF) mission. The new DM is based largely upon existing lightweight, low power MEMS DM technology at Boston University (BU), tailored to the rigorous optical and mechanical requirements of the nulling coronagraph. It consists of 329-hexagonal segments on a 600μm pitch, each with tip/tilt and piston degrees of freedom. The mirror segments have 1μm of stroke, a tip/tilt range of 600 arc-seconds, and maintain their figure to within 2nm RMS under actuation. The polished polycrystalline silicon mirror segments have a surface roughness of 5nm RMS and an average curvature of 270mm. Designing a mirror segment that maintains its figure during actuation was a very significant challenge faced during DM development. Two design concepts were pursued in parallel to address this challenge. The first design uses a thick, epitaxial grown polysilicon mirror layer to add rigidity to the mirror segment. The second design reduces mirror surface bending by decoupling actuator diaphragm motion from the mirror surface motion. This is done using flexure cuts around the mirror post in the actuator diaphragm. Both DM architectures and their polysilicon microfabrication process are presented. Recent optical and electromechanical characterization results will also be discussed, in addition to plans for further improvement of DM figure to satisfy nulling coronagraph optical requirements.

Citation Download Citation

Jason B. Stewart, Thomas G. Bifano, Paul Bierden, Steven Cornelissen, Timothy Cook, and B. Martin Levine "Design and development of a 329-segment tip-tilt piston mirror array for space-based adaptive optics", Proc. SPIE 6113, MEMS/MOEMS Components and Their Applications III, 61130O (23 January 2006); https://doi.org/10.1117/12.651373

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available