Analysis and optimization of thin film photovoltaic materials and device fabrication by real time spectroscopic ellipsometry

Jian Li; Jason A. Stoke; Nikolas J. Podraza; Deepak Sainju; Anuja Parikh; Xinmin Cao; Himal Khatri; Nicolas Barreau; Sylvain Marsillac; Xunming Deng; Robert W. Collins

doi:10.1117/12.736362

3 October 2007 Analysis and optimization of thin film photovoltaic materials and device fabrication by real time spectroscopic ellipsometry

Jian Li, Jason A. Stoke, Nikolas J. Podraza, Deepak Sainju, Anuja Parikh, Xinmin Cao, Himal Khatri, Nicolas Barreau, Sylvain Marsillac, Xunming Deng, Robert W. Collins

Author Affiliations +

Proceedings Volume 6651, Photovoltaic Cell and Module Technologies; 665107 (2007) https://doi.org/10.1117/12.736362
Event: Solar Energy + Applications, 2007, San Diego, California, United States

Abstract

Methods of spectroscopic ellipsometry (SE) have been applied to investigate the growth and properties of the material components used in the three major thin film photovoltaics technologies: (1) hydrogenated silicon (Si:H); (2) cadmium telluride (CdTe); and (3) copper indium-gallium diselenide (CuIn_1-xGa_xSe² or CIGS). In Si:H technology, real time SE (RTSE) has been applied to establish deposition phase diagrams that describe very high frequency (vhf) plasmaenhanced chemical vapor deposition (PECVD) processes for hydrogenated silicon (Si:H) and silicon-germanium alloy (Si_1-xGe_x:H) thin films. This study has reaffirmed that the highest efficiencies for a-Si:H and a-Si_1-xGe_x:H component solar cells of multijunction devices are obtained when the i-layers are prepared under maximal H₂ dilution conditions. In CdTe technology, the magnetron sputter deposition of polycrystalline CdTe, CdS, and CdTe_1-xS_x thin films as well as the formation of CdS/CdTe and CdTe/CdS heterojunctions has been studied. The nucleation and growth behaviors of CdTe and CdS show strong variations with deposition temperature, and this influences the ultimate grain size. The dielectric functions ε of the CdTe_1-xS_x alloys have been deduced in order to set up a database for real time investigation of inter-diffusion at the CdS/CdTe and CdTe/CdS interfaces. In CIGS technology, strong variations in ε of the Mo back contact during sputter deposition have been observed, and these results have been understood applying a Drude relaxation time that varies with the Mo film thickness. Ex-situ SE measurements of a novel In₂S₃ window layer have shown critical point structures at 2.77±0.08 eV, 4.92±0.005 eV, and 5.64±0.005 eV, as well as an absorption tail with an onset near 1.9 eV. Simulations of solar cell performance comparing In₂S₃ and the conventional CdS have revealed similar quantum efficiencies, suggesting the possibility of a Cd-free window layer in CIGS technology.

Citation Download Citation

Jian Li, Jason A. Stoke, Nikolas J. Podraza, Deepak Sainju, Anuja Parikh, Xinmin Cao, Himal Khatri, Nicolas Barreau, Sylvain Marsillac, Xunming Deng, and Robert W. Collins "Analysis and optimization of thin film photovoltaic materials and device fabrication by real time spectroscopic ellipsometry", Proc. SPIE 6651, Photovoltaic Cell and Module Technologies, 665107 (3 October 2007); https://doi.org/10.1117/12.736362

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available