Design of a wavelength-tunable light source using an acousto-optic tunable filter

Heidi Hall; Mark Bridges; Silas Leavesley; J. Paul Robinson

doi:10.1117/12.749945

14 September 2007 Design of a wavelength-tunable light source using an acousto-optic tunable filter

Heidi Hall, Mark Bridges, Silas Leavesley, J. Paul Robinson

Proceedings Volume 6668, Novel Optical Systems Design and Optimization X; 66680W (2007) https://doi.org/10.1117/12.749945
Event: Optical Engineering + Applications, 2007, San Diego, California, United States

Abstract

We report on the design and performance of a wavelength-tunable light source for illumination of fluorescent samples. The requirements included a maximum possible irradiance at the sample, rapid and continuous tuning between wavelengths over the range of 400-800 nm with 10-40 nm wide spectral output pass bands, 3 dB out-of-band spectral rejection, and coupling of the light into a fiber bundle for delivery to the sample. We selected an acousto-optic tunable filter (AOTF) for spectral tuning and a xenon arc lamp as the input source in this application. The tuning range of the AOTF was 450-750 nm, necessitating the use of additional narrow-band interference filters to tune across the entire 400-800 nm range. The AOTF had a 4.2° separation angle between the diffracted and non-diffracted beams. In order to achieve the best out-of-band rejection possible and to avoid overlap of the beams, the input source must diverge less than half the separation angle. The active aperture of the AOTF was 10 mm × 10 mm. The optical design included separate beam paths for the AOTF and interference filters that resulted in optimizing the throughput for each case and matching both beams to the numerical aperture of the fiber bundle. We discuss the design process, our prototype system, and issues to be addressed for use of an AOTF in fluorescent excitation applications.

Citation Download Citation

Heidi Hall, Mark Bridges, Silas Leavesley, and J. Paul Robinson "Design of a wavelength-tunable light source using an acousto-optic tunable filter", Proc. SPIE 6668, Novel Optical Systems Design and Optimization X, 66680W (14 September 2007); https://doi.org/10.1117/12.749945

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available