ArF scanner performance improvement by using track integrated CD optimization

Jacky Huang; Shinn-Sheng Yu; Chih-Ming Ke; Timothy Wu; Yu-Hsi Wang; Tsai-Sheng Gau; Dennis Wang; Allen Li; Wenge Yang; Araki Kaoru

doi:10.1117/12.656104

24 March 2006 ArF scanner performance improvement by using track integrated CD optimization

Jacky Huang, Shinn-Sheng Yu, Chih-Ming Ke, Timothy Wu, Yu-Hsi Wang, Tsai-Sheng Gau, Dennis Wang, Allen Li, Wenge Yang, Araki Kaoru

Author Affiliations +

Proceedings Volume 6152, Metrology, Inspection, and Process Control for Microlithography XX; 615228 (2006) https://doi.org/10.1117/12.656104
Event: SPIE 31st International Symposium on Advanced Lithography, 2006, San Jose, California, United States

Abstract

In advanced semiconductor processing, shrinking CD is one of the main objectives when moving to the next generation technology. Improving CD uniformity (CDU) with shrinking CD is one of the biggest challenges. From ArF lithography CD error budget analysis, PEB (post exposure bake) contributes more than 40% CD variations. It turns out that hot plate performance such as CD matching and within-plate temperature control play key roles in litho cell wafer per hour (WPH). Traditionally wired or wireless thermal sensor wafers were used to match and optimize hot plates. However, sensor-to-sensor matching and sensor data quality vs. sensor lifetime or sensor thermal history are still unknown. These concerns make sensor wafers more suitable for coarse mean-temperature adjustment. For precise temperature adjustment, especially within-hot-plate temperature uniformity, using CD instead of sensor wafer temperature is a better and more straightforward metrology to calibrate hot plates. In this study, we evaluated TEL clean track integrated optical CD metrology (IM) combined with TEL CD Optimizer (CDO) software to improve 193-nm resist within-wafer and wafer-to-wafer CD uniformity. Within-wafer CD uniformity is mainly affected by the temperature non-uniformity on the PEB hot plate. Based on CD and PEB sensitivity of photo resists, a physical model has been established to control the CD uniformity through fine-tuning PEB temperature settings. CD data collected by track integrated CD metrology was fed into this model, and the adjustment of PEB setting was calculated and executed through track internal APC system. This auto measurement, auto feed forward, auto calibration and auto adjustment system can reduce the engineer key-in error and improve the hot plate calibration cycle time. And this PEB auto calibration system can easily bring hot-plate-to-hot-plate CD matching to within 0.5nm and within-wafer CDU (3σ) to less than 1.5nm.

Citation Download Citation

Jacky Huang, Shinn-Sheng Yu, Chih-Ming Ke, Timothy Wu, Yu-Hsi Wang, Tsai-Sheng Gau, Dennis Wang, Allen Li, Wenge Yang, and Araki Kaoru "ArF scanner performance improvement by using track integrated CD optimization", Proc. SPIE 6152, Metrology, Inspection, and Process Control for Microlithography XX, 615228 (24 March 2006); https://doi.org/10.1117/12.656104

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available