Tunable Fabry-Perot filters operating in the 3 to 5 &#956;m range for infrared micro-spectrometer applications

Jaroslaw Antoszewski; Adrian Keating; Kevin Winchester; Thuyen Nguyen; Dilusha Silva; Charles Musca; John Dell; Olivia Samardzic; Lorenzo Faraone

doi:10.1117/12.662539

21 April 2006 Tunable Fabry-Perot filters operating in the 3 to 5 μm range for infrared micro-spectrometer applications

Jaroslaw Antoszewski, Adrian Keating, Kevin Winchester, Thuyen Nguyen, Dilusha Silva, Charles Musca, John Dell, Olivia Samardzic, Lorenzo Faraone

Author Affiliations +

Proceedings Volume 6186, MEMS, MOEMS, and Micromachining II; 618608 (2006) https://doi.org/10.1117/12.662539
Event: SPIE Photonics Europe, 2006, Strasbourg, France

Abstract

In this article the design, fabrication and characterization of micro-Fabry-Perot filters operating in the mid-wavelength infrared range is presented. Using surface micromachining techniques, low temperature silicon nitride based structures with distributed Bragg mirrors made of Ge/SiO/Ge layers have been fabricated and tested, both mechanically and optically. The membrane/mirror deflection has been measured using an optical profilometer and is estimated to be of the order of 800nm with voltage bias up to 17V while still preserving good mirror parallelism. The respective optical transmission peak shifted from 4.5μm to 3.6μm. Without antireflection coating at the back of the silicon substrate ~50% maximum transmission has been measured at the resonance peaks. The FWHM was measured to be 210+/-20nm, which is ~20% larger than estimated theoretically. In agreement with theoretical modeling, after crossing 1/3 of the cavity length, the membrane/mirror structure has been found to enter into an unstable region followed by snap-down to the bottom mirror surface. In order to prevent this detrimental effect, membranes with anti-stiction bumps have been fabricated demonstrating repeatable structure recovery from the stage of full collapse.

Citation Download Citation

Jaroslaw Antoszewski, Adrian Keating, Kevin Winchester, Thuyen Nguyen, Dilusha Silva, Charles Musca, John Dell, Olivia Samardzic, and Lorenzo Faraone "Tunable Fabry-Perot filters operating in the 3 to 5 μm range for infrared micro-spectrometer applications", Proc. SPIE 6186, MEMS, MOEMS, and Micromachining II, 618608 (21 April 2006); https://doi.org/10.1117/12.662539

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available