Micromachining of a fiber-to-waveguide coupler using grayscale lithography and through-wafer etch

Thomas Dillon; Mathew Zablocki; Shouyan Shi; Janusz Murakowski; Dennis Prather

doi:10.1117/12.764036

26 February 2008 Micromachining of a fiber-to-waveguide coupler using grayscale lithography and through-wafer etch

Thomas Dillon, Mathew Zablocki, Shouyan Shi, Janusz Murakowski, Dennis Prather

Proceedings Volume 6882, Micromachining and Microfabrication Process Technology XIII; 688206 (2008) https://doi.org/10.1117/12.764036
Event: MOEMS-MEMS 2008 Micro and Nanofabrication, 2008, San Jose, California, United States

Abstract

For some time, the micro-optics and photonics fields have relied on fabrication processes and technology borrowed from the well-established silicon integrated circuit industry. However, new fabrication methodologies must be developed for greater flexibility in the machining of micro-optic devices. To this end, we have explored grayscale lithography as an enabler for the realization of such devices. This process delivers the ability to sculpt materials arbitrarily in three dimensions, thus providing the flexibility to realize optical surfaces to shape, transform, and redirect the propagation of light efficiently. This has opened the door for new classes of optical devices. As such, we present a fiber-to-waveguide coupling structure utilizing a smoothly contoured lensing surface in the device layer of a silicon-on insulator (SOI) wafer, fabricated using grayscale lithography. The structure collects light incident normally to the wafer from a singlemode optical fiber plugged through the back surface and turns the light into the plane of the device layer, focusing it into a single-mode waveguide. The basis of operation is total internal reflection, and the device therefore has the potential advantages of providing a large bandwidth, low polarization sensitivity, high efficiency, and small footprint. The structure was optimized with a simulated annealing algorithm in conjunction with two-dimensional finite-difference time-domain (FDTD) simulation accelerated on the graphics processing unit (GPU), and achieves a theoretical efficiency of approximately seventy percent, including losses due to Fresnel reflection from the oxide/silicon interface. Initial fabrication results validate the principle of operation. We discuss the grayscale fabrication process as well as the through-wafer etch for mechanical stabilization and alignment of the optical fiber to the coupling structure. Refinement of the through-wafer etch process for high etch rate and appropriate sidewall taper are addressed.

Citation Download Citation

Thomas Dillon, Mathew Zablocki, Shouyan Shi, Janusz Murakowski, and Dennis Prather "Micromachining of a fiber-to-waveguide coupler using grayscale lithography and through-wafer etch", Proc. SPIE 6882, Micromachining and Microfabrication Process Technology XIII, 688206 (26 February 2008); https://doi.org/10.1117/12.764036

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available