Paper
25 September 2008 Low-loss HR coatings on fused silica substrates for 193 nm micro-lithography applications
Sven Laux, Helmut Bernitzki, Dieter Fasold, Michael Klaus, Uwe Schuhmann
Author Affiliations +
Abstract
High reflective coatings for 193nm wavelength and 45° incidence were developed which combines the advantages of all-oxide and all-fluorides layer stacks. Using plasma-assisted evaporation very smooth and dense Al2O3/ SiO2 multilayers showing small light scatter were deposited onto fused silica substrates. In the same coating process followed metal fluoride stacks, which could reduce the resulting coating absorption at 193nm. The non-polarized reflectance of combined stacks at 193nm is R>98.5% at 45° and R>98.0% for an angle range of 42°-48°. As the number of fluoride layers could be drastically reduced compared to all-fluoride coatings any formation of micro-cracks could be avoided. The stress of the oxide/fluoride stacks was less than 40MPa.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sven Laux, Helmut Bernitzki, Dieter Fasold, Michael Klaus, and Uwe Schuhmann "Low-loss HR coatings on fused silica substrates for 193 nm micro-lithography applications", Proc. SPIE 7101, Advances in Optical Thin Films III, 71010Y (25 September 2008); https://doi.org/10.1117/12.797820
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical coatings

Reflectivity

Silica

Absorption

Oxides

Laser applications

Light scattering

Back to Top