Paper
14 February 2007 Large-stroke self-aligned vertical comb drive actuated micromirror arrays for adaptive optics applications
Author Affiliations +
Abstract
A high-stroke micromirror array was designed, modeled, fabricated and tested. Each pixel in the 4×4 array consists of a self-aligned vertical comb drive actuator that has had a single-crystal silicon mirror successfully bonded to it. Two different bonding technologies were used, photoresist bonding and fusion bonding. The results of each of these bonding methods will be presented. Analytical models combined with CoventorWareR simulations were used to design these elements that would move up to 10 microns in piston motion with 200V applied. Devices were fabricated according to this design and difference measurements performed with a white-light interferometer demonstrated a displacement of 0.18 microns with 200V applied. Further investigation revealed that fabrication process inaccuracy led to significantly stiffer mechanical springs in the fabricated devices. The increased stiffness of the springs was shown to account for the reduced displacement that was observed.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Emily Carr, Scot Olivier, and Olav Solgaard "Large-stroke self-aligned vertical comb drive actuated micromirror arrays for adaptive optics applications", Proc. SPIE 6467, MEMS Adaptive Optics, 64670U (14 February 2007); https://doi.org/10.1117/12.710894
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconducting wafers

Actuators

Mirrors

Photomasks

Teeth

3D modeling

Micromirrors

Back to Top