Paper
16 October 2012 Effects of structured surface errors on MTF of off-axis TMA system
Author Affiliations +
Proceedings Volume 8416, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 84161B (2012) https://doi.org/10.1117/12.970630
Event: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2012), 2012, Xiamen, China
Abstract
Off-axis three-mirror anastigmatic (TMA) system adopt off-axis aspheric mirror for high resolution telescope. However, residual tooling marks from advanced aspheric fabrication techniques such as computer controlled optical surfacing (CCOS) are difficult to remove. These marks typically in the mid-spatial frequency (MSF), in optical fabrication also named surface band error. MSF will reduce MTF and contrast. This paper using Fourier method to research the relationship between MSF and the reduction, and applies simulation method to analyze the effect of fabrication residual marks on the loss of MTF in off-axis TMA optical system, also analyze the scatter influence of MSF by plot the relationship between surface errors PV/RMS and spot diameter.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xuefeng Zeng, Feng Yan, and Xuejun Zhang "Effects of structured surface errors on MTF of off-axis TMA system", Proc. SPIE 8416, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 84161B (16 October 2012); https://doi.org/10.1117/12.970630
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Spatial frequencies

Telescopes

Mirrors

Optical transfer functions

Device simulation

Diffraction

RELATED CONTENT


Back to Top