Infrared thermography inspection of glass reinforced plastic (GRP) wind turbine blades and the concept of an automated scanning device

Nicolas P. Avdelidis; C. Ibarra-Castanedo; X. P. V. Maldague

doi:10.1117/12.2016671

22 May 2013 Infrared thermography inspection of glass reinforced plastic (GRP) wind turbine blades and the concept of an automated scanning device

Nicolas P. Avdelidis, C. Ibarra-Castanedo, X. P. V. Maldague

Author Affiliations +

Proceedings Volume 8705, Thermosense: Thermal Infrared Applications XXXV; 87050G (2013) https://doi.org/10.1117/12.2016671
Event: SPIE Defense, Security, and Sensing, 2013, Baltimore, Maryland, United States

Abstract

Infrared thermography techniques have been used for many years in the non-destructive testing and evaluation (NDT and E) of materials and structures. The main advantage of thermography over classical NDT techniques resides in the possibility of inspecting large areas in a fast and safe manner without needing to have access to both sides of the component. Nonetheless infrared thermography is limited to the detection of relatively shallow defects (a few millimetres under the surface), since it is affected by 3D heat diffusion. However, the most common types of anomalies found on composites, such as GRP wind turbine blades are delaminations, disbonds, water ingress, node failure and core crushing, and can be effectively detected and sometimes quantified using active thermographic techniques. This research work presents the use of infrared thermography on glass reinforced plastic (GRP) wind turbine blades assessment. Finally, the development of an autonomous, novel and lightweight multi-axis scanning system, as a concept, deploying in situ thermography NDT is also presented, with the intention of developing maximisation of the blade area coverage in a single run, at a known sensitivity, with the utilisation of the minimum number of system degrees of freedom and the maximum repeatability, as well as positional accuracy possible.

Citation Download Citation

Nicolas P. Avdelidis, C. Ibarra-Castanedo, and X. P. V. Maldague "Infrared thermography inspection of glass reinforced plastic (GRP) wind turbine blades and the concept of an automated scanning device", Proc. SPIE 8705, Thermosense: Thermal Infrared Applications XXXV, 87050G (22 May 2013); https://doi.org/10.1117/12.2016671

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available