Paper
23 August 2013 Research on the influence of waveguide’s exposure steepness on 0.345THz FWGTWT’s performance
Fang Zhang, Zhiwei Dong, Ye Dong
Author Affiliations +
Proceedings Volume 8909, International Symposium on Photoelectronic Detection and Imaging 2013: Terahertz Technologies and Applications; 89091C (2013) https://doi.org/10.1117/12.2034954
Event: ISPDI 2013 - Fifth International Symposium on Photoelectronic Detection and Imaging, 2013, Beijing, China
Abstract
In the MEMS fabrication process of 0.345THz micro-electric vacuum FWG-TWT, the periodic FWG slow wave structure is assembled by joining two symmetrical metal pieces with grooves. In ideal design, these grooves’ profiles should be perpendicular to their symmetrical plane while the device’ performance can be best, however those slope angles are actually more than 90 degrees because of their molds’ insufficient exposure. This paper does research on the influence of waveguide’s exposure steepness on the performance of FWG circuit through theoretical analysis and numerical simulation. The range of slope angle studied in this paper is from 0 to 5 degrees, and as the slope angle becomes larger, electromagnetic signal’s transmission attenuation increases. But by adjusting other working parameters of the circuit, the high net gain can be maintained while its bandwidth is going to decrease. These results will be helpful for the experiment.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fang Zhang, Zhiwei Dong, and Ye Dong "Research on the influence of waveguide’s exposure steepness on 0.345THz FWGTWT’s performance", Proc. SPIE 8909, International Symposium on Photoelectronic Detection and Imaging 2013: Terahertz Technologies and Applications, 89091C (23 August 2013); https://doi.org/10.1117/12.2034954
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal attenuation

Electromagnetism

Waveguides

Electron beams

Metals

Device simulation

Dispersion

Back to Top