Paper
3 March 2014 Fiber optic ultrasound transducers with carbon/PDMS composite coatings
Author Affiliations +
Abstract
Novel ultrasound transducers were created with a composite of carbon nanotubes (CNTs) and polydimethylsiloxane (PDMS) that was dip coated onto the end faces of optical fibers. The CNTs were functionalized with oleylamine to allow for their dissolution in xylene, a solvent of PDMS. Ultrasound pulses were generated by illuminating the composite coating with pulsed laser light. At distances of 2 to 16 mm from the end faces, ultrasound pressures ranged from 0.81 to 0.07 MPa and from 0.27 to 0.03 MPa with 105 and 200 μm core fibers, respectively. Using an optical fiber hydrophone positioned adjacent to the coated 200 µm core optical fiber, ultrasound reflectance measurements were obtained from the outer surface of a sheep heart ventricle. The results of this study suggest that ultrasound transducers that comprise optical fibers with CNT-PDMS composite coatings may be suitable for miniature medical imaging probes.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Charles A. Mosse, Richard J. Colchester, Davinder S. Bhachu, Edward Z. Zhang, Ioannis Papakonstantinou, and Adrien E. Desjardins "Fiber optic ultrasound transducers with carbon/PDMS composite coatings", Proc. SPIE 8943, Photons Plus Ultrasound: Imaging and Sensing 2014, 89430P (3 March 2014); https://doi.org/10.1117/12.2037283
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Ultrasonography

Optical coatings

Composites

Tissue optics

Transducers

Reflectivity

Back to Top