Current spreading in UV-C LEDs emitting at 235 nm

Mickael Lapeyrade; Florian Eberspach; Johannes Glaab; Neysha Lobo-Ploch; Christoph Reich; Christian Kuhn; Martin Guttmann; Tim Wernicke; Frank Mehnke; Sven Einfeldt; Arne Knauer; Markus Weyers; Michael Kneissl

doi:10.1117/12.2076349

13 March 2015 Current spreading in UV-C LEDs emitting at 235 nm

Mickael Lapeyrade, Florian Eberspach, Johannes Glaab, Neysha Lobo-Ploch, Christoph Reich, Christian Kuhn, Martin Guttmann, Tim Wernicke, Frank Mehnke, Sven Einfeldt, Arne Knauer, Markus Weyers, Michael Kneissl

Author Affiliations +

Proceedings Volume 9363, Gallium Nitride Materials and Devices X; 93631P (2015) https://doi.org/10.1117/12.2076349
Event: SPIE OPTO, 2015, San Francisco, California, United States

Abstract

We present UV-C LEDs emitting around 235 nm grown by MOVPE on ELO AlN/sapphire substrates. In order to account for the low conductivity of high Al content AlGaN layers and the associated high contact resistances, we designed an optimized compact LED geometry based on electro-thermal simulations of the current spreading. Experimental data (layer and contact resistances) are collected on test structures and used as input parameters for 3-D current spreading simulations. With resistances of the layers (n and p) approaching 0.1 Ωcm, the use of a segmented p-area with broad n-contact fingers (10 μm or more) that are close to the mesa edge (5 μm) help to maximize the emission power in the center of the structure. Based on this knowledge a series of compact LEDs of size 500 μm x 500 μm is designed and simulated. We get confirmation that the segmentation of the p-area is the most critical parameter to limit the non-uniformity introduced by the high n-sheet resistances. Up to 17% in emission power can be gained when the n-contacts are designed properly. LEDs with the optimum geometry were processed and measured. We get a good confirmation of our model concerning the distribution of the emission power. Both simulations and measurements show current crowding at the edge of the n-contact, however the power loss in the middle of the chip is higher than predicted.

Citation Download Citation

Mickael Lapeyrade, Florian Eberspach, Johannes Glaab, Neysha Lobo-Ploch, Christoph Reich, Christian Kuhn, Martin Guttmann, Tim Wernicke, Frank Mehnke, Sven Einfeldt, Arne Knauer, Markus Weyers, and Michael Kneissl "Current spreading in UV-C LEDs emitting at 235 nm", Proc. SPIE 9363, Gallium Nitride Materials and Devices X, 93631P (13 March 2015); https://doi.org/10.1117/12.2076349

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available